AW35 Aubergine Purple Ambiante Water Resist Acrylic Paint 500ML + Varnish Catalyst 20GR

For those contributing to the future with recycling, a solution for wet floors: Ambiante with a nano technology formula. With high adhesion strength, long-lasting, resistant to impact, scratches, and wear, non-yellowing, stain-resistant, and brush mark-free paint awaits you with Cadence colors. Paint both your furniture and ceramic sanitary ware in the same colors. Recycling is calling you. Because you can do it too!

For wet floors, Ambiante Water-Resistant Matte Acrylic Paint with high adhesion strength, long-lasting, resistant to impact, scratches, and wear, non-yellowing, and stain-resistant, increases water resistance by adding Paint Catalyst to extra slippery surfaces like glass and ceramic.

Suitable for use on all wet floors such as Tiles, Ceramics, Sinks, Bathtubs, Bathroom Counters, and Kitchen Counters.

Ambiante Water-Resistant Matte Acrylic Paint does not contain harmful substances and complies with CE & EN71 standards.

Usage: Open the catalyst and pour it into the paint. After shaking well, start applying to the surface. Make sure the surface is dry and free of dirt. Suitable for painting with products like rollers and brushes. The preferred drying time is 24 hours. You can optionally apply 2 coats. You can start using it after the paint is completely dry. Varnish provides extra protection. You can apply varnish for extra protection according to your preference.

IMPORTANT NOTE: The product should be used within 24 hours after mixing with the catalyst.

Product Features:

• Matte
• Creamy consistency, Quick-drying, Odorless
• Water-based
• Water-resistant, weather-resistant
• High coverage
• Can be mixed with other colors
• Easy to apply
• Does not darken or fade
• Suitable for contact with food

Technical Information:

• All surfaces to be applied should be free of dust, dirt, and oil, and dry.
• Can be applied directly to the surface without sanding and primer.
• The entire bottle should be emptied into the painting container and mixed with the catalyst until homogeneous. (Add 10ml for 250 ml, 20 ml for 500 ml of catalyst.)
• Should be used without adding water.
• Natural drying gives the best result.
• Depending on the air temperature, the second coat can be applied 6-8 hours later.
• For very glossy surfaces like ceramic, the use of Glossy Surface Primer is recommended, and for plastic and metal surfaces, Plastic Primer is recommended.
• Does not require varnish.